Best option would be a front hitch like the part # 306-X7352 to carry a spare carrier like the etrailer hitch carrier part # e98ZR so that you'd have the rear hitch to carry the bike rack like with the Hollywood Racks Trail Rider part # HR200Z. Trying to carry both the spare and the bikes on a single hitch wouldn't really be feasible. view full answer...
As long as you've got an existing roof rack system with crossbars then you can use the Yakima LockNLoad Platform Rack for Crossbars - Aluminum - 84" Long x 62" Wide # Y05049-39 since this comes with the hardware to mount to most factory and aftermarket crossbars. If you don't already have a roof rack then you will need to add one and the roof rack you need will depend on whether or not you've got the factory mounted tracks on the high roof.
If you've got the tracks, then I recommend using... view full answer...
We do have an option for you but for your 2021 Winnebago Revel Mercedes Sprinter 2500 4X4 there are currently no supporting airbag system products available. With it being so new designers haven't been able to produce a fitting product that will give you the smoother ride you're looking for.
We do instead recommend Timbren Rear Suspension Enhancement System product # TMBRSP25A and Timbren Front Suspension Enhancement System product # TMBFSP35. Both of these are confirmed to fit your 2021... view full answer...
Your motorhome built on a 2022 Mercedes-Benz Sprinter 2500 chassis is a Crew, so the correct WeatherTech floor mats are the following:
- WeatherTech Front Floor Mats # WT26YV view full answer...
If the travel trailer with a 7-way does not have brakes the easy solution is the # 37185 which would plug right into your current 4-way and all of the lighting circuits would be active. If instead you did have trailer brakes you'd want to use the # ETBC7 which comes with brake controller wiring needed as well as the same adapter of the # 37185.
The 7-way kit part # TK22115 which is custom fit for you vehicle essentially is the same setup as a 4-way like you have converted to a 7-way with... view full answer...
The Thule Elite Van XT 2 Bike Rack # TH302043 really only makes sense to use on the passenger side door of your 2021 Mercedes-Benz Sprinter 2500. With it mounted on this door you will be able to open your doors as opposed to it being on the drivers door. With it on the drivers door you would have to remove the bikes and reposition the carrier to open the passenger side door far enough to open the drivers door.
I did reach out to Thule and they confirmed that it needs to be mounted on... view full answer...
I do have a solution, but there are no custom fit options available for your 2007 Dodge Sprinter 2500. What you can use is a universal hitch like the Curt # C47CR. This is a Class V weld-on hitch so we recommend taking it to a certified welder for installation. The hitch has a 2" receiver, a 9" drop, and fits vehicle frames 18-44" wide. If you need taller brackets the # C99CR is also available with an 18" drop. view full answer...
I have the perfect solution for you with the Yakima JetStream roof rack:
70" JetStream Crossbars - # Y00427
SkyLine Towers - # Y53TR
Landing Pad 1 - # Y00221
Lock Core Kit - # Y07204 (optional)
This is designed to fit flush rails with a track like what you have on your 2022 Mercedes-Benz Sprinter 2500 so that you can slide the crossbars front and back depending on what you'll be carrying. I really like this rack system because it has some fined-tuned steps that give you the best fit possible,... view full answer...
The Classic Accessories PolyPro III Deluxe RV Cover # CA80103 is going to be the best cover we carry for the stock dimensions of your 2023 Mercedes Sprinter 144RV. This cover fits up to 20' long vans that can be up to 9'9" tall. If your van is longer due to a spare tire mounted on the rear door or other parts you would want to step up to the next larger size # CA80104.
The cover can be installed by one person but if you have any roof mounted products you would need to get on the roof... view full answer...
Hey Roger, the interior dimensions of the Inno Cargo Box part # IN94FR are close enough to the top dimensions of the box that you could use as a guide for whether or not your panel would fit or not. Those dimensions are 66-1/8 inches long by 26 inches wide. view full answer...
The Rhino-Rack Sunseeker Awning # RR32132 is designed to install on a roof rack that has bars with a channel or slot in their top surfaces. These include their own Vortex Aero bars like the ones in the 3-bar roof rack made for the Sprinter 2500 with a bare standard roof, which consists of parts # RRVA180B-3, # RLTFMS and # RRVA-FK1-3.
I linked a photo to show you this bar type and the mounting channel.
AluRack makes racks that are much like a large roof cargo basket and these do not have... view full answer...
The ring on the Trailer Hitch Receiver Mounted Forged Tow Eye # TR63045 is approximately 1" thick. The Bulldog Winch 3/4" Bow Shackle # BDW20020 has an opening of about 1-1/4". This will work, but it will be a tight fit. I recommend going with the Bulldog Winch Bow Shackle # BDW20117. This has an opening of 1-3/4" which will be plenty to fit the Trailer Hitch Receiver Mounted Forged Tow Eye # TR63045. You can then use tow strap such as Erickson Recovery Strap # EM59600.
The Bulldog Shackle... view full answer...
The crank handle for the Lippert Components Spare Tire Winch with Offset Cable item # LC159056, is Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2" item # LC1315411.
The Spare Tire Winch item # LC159056 has a 1/2-inch round crank fitting and the Replacement Crank Extension item # LC1315411 has a 3/4-inch hex shape on the other end. I have attached a picture and a review video so you can get a better look at the Crank Extension. view full answer...
I checked with Blue Ox and the base plate kit part # BLU33MR is a fit for the 2023 Mercedes Sprinter at this time but not a 2024. Roadmaster does not have an option for either yet at this time. view full answer...
We would not consider your 2020 Mercedes Sprinter 2500 to be an RV, we consider it to be a passenger van for hitch bike rack compatibility. You will not have any issues with the Kuat NV 2.0 Base Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Matte Black, part # BA22B, installed on your van.
I have included a product review of the Kuat NV 2.0 below. view full answer...
The only running board kit that has been custom-made for your 2019 Mercedes-Benz Sprinter 2500 is the Aries RidgeStep Running Boards w/ Custom Installation Kit # AA86ZB. This doesn't have the fancy electric extend/retract feature but it gives you the step system you're looking for to help your wife out. I like the multiple holes in the boards that help provide extra grip.
You might be able to get the Actiontrac steps to fit but that would be a complete modification and you would want a... view full answer...
Yes, the etrailer Trailer Hitch Receiver # e82TR will fit your 2022 Mercedes-Benz Sprinter 2500 with the factory step bumper. I actually like this because it has a matte black finish as opposed to the other options that have a glossy black finish. The matte black blends in a little better and is more durable so it's an all around plus with this hitch installed.
To tow a trailer you also need the Wiring Kit # TK82VR and then swap out the 7-Way with the Hopkins Adapter # 30955 so you have... view full answer...
I have a solution for you, however, the Curt 19x60 carrier, part # C18100 cannot have bike rack extensions added to it.
Instead, I recommend Hollywood Rack's Sport Rider SE2 with Cargo Carrier, part # HR1450Z-85. This is a Class III rack that is rated for large van and RV use. It can carry two 50 pound bikes and up to 100 pounds of cargo in the carrier, and the carrier and rack can be used independently of each other on other vehicles. view full answer...
Curt trailer hitch only fits the 3500 models and not the 2500 models of the 2016 Mercedes Sprinter. For your 2500 with a factory step bumper you can use # 13358.
Please note this hitch does not fit models with 30-3/8" frame, measured outside to outside of frame. I have linked a video showing an example installation for you. view full answer...
The Thule Hullavator Pro # TH898 is actually only meant to carry kayaks. If you are looking for a canoe carrier from Thule then the only option is the Portage Canoe Carrier w/ Tie-Downs # TH819. This carrier clamps around your crossbars but if you have T-Slots you can use the Adapter # THXADAPT12 which can provide some security if you have locking crossbars.
We do carry some other alternative options like the Inno Locker # INA446 which is an excellent carrier that includes locks, but anything... view full answer...